HYSBYSIAD O GONTRACT - CENEDLAETHOL

1 Manylion yr Awdurdod

1.1

Enw a Chyfeiriad yr Awdurdod

1.2

Cyfeiriad ar gyfer cael dogfennaeth

1.3

Mae'n rhaid dychwelyd dogfennau wedi'u cwblhau at:

2 Manylion y Contract

2.1

Teitl

Cafe Kitchen Refurbishment 2022

2.2

Disgrifiad o'r nwyddau neu'r gwasanaethau sydd eu hangen

Commercial Kitchen installation

NOTE: To register your interest in this notice and obtain any additional information please visit the Sell2Wales Web Site at https://www.sell2wales.gov.wales/Search/Search_Switch.aspx?ID=117846.

The buyer has indicated that it will accept electronic responses to this notice via the Postbox facility. A user guide is available at https://www.sell2wales.gov.wales/sitehelp/help_guides.aspx.

Suppliers are advised to allow adequate time for uploading documents and to dispatch the electronic response well in advance of the closing time to avoid any last minute problems.

2.3

Cod a Dosbarthiad yr Hysbysiad

2.4

Cyfanswm maint neu gwmpas y tendr

Budget up to £30,000 to include: -

Item Description Rate Qty Type Total

1 Preliminaries

1.1 Health & Safety - 1 item

Method Statements and Risk Assessments

Signage and Separation of Works

1.2 Pre-Tender Site Visit 1 item

A Site visit is required to establish the Electrical and

Mechanical Requirements

1.3 Access Equipment - 1 item

Podiums etc.

-

2 Demolition & Clearance

2.1 Clearance 1 item

Removal of existing equipment and relocate to

Workshop Area

2.2 Removal and Disposal 1 item

Floor Coverings

Suspended Ceiling

Existing Wall Covering and Hygienic Cladding

Existing Plasterboard (Alterations to Electrical)

-

3 Structural & Alterations

3.1 Alterations to Location of the Kitchen Door 1 item -

Remove existing Fire Door Set (Set-Aside for Re-Use

Set-up Protection to Avoid Dust

Cut-out new Opening Location

100mm Dense Blockwork

Lintel

Plaster Repairs

Re-Fit Existing Fire Door Set

Replacement Architraves and Skirting Repairs

-

4 Walls

4.1 New Partitions

4.1.1 Block up Existing Kitchen Door 1 item

Remove existing Fire Door Set and Dispose

100x50mm Frame

75mm Acoustic Insulation

12.5mm Plasterboard

Skirting Repairs

4.1.2 New Wall to Create Washup Area 1 item

100x50mm Frame

Notes: See 5.2 Re: Wall Covering

4.1.3 Partition Over Proposed Door (Cleaners) 1 item

100x50mm Frame

75mm Acoustic Insulation

12.5mm Plasterboard

Plaster Skim

Skirting Repairs

4.1.4 Extend Boxing (Kitchen Waste) 1 item

100x50mm Frame

4.2 WhiteRock Cladding 1 item

Install 12mm Ply to Existing Walls

Base Trim (to Vinyl Coved Upstand)

Joining Trim

Internal & External Corners (Thermally Formed)

3mm Gloss WhiteRock Hygienic Cladding

Thermoformed Internal & External Corners

-

5 Ceilings

5.1 Fire Stopping 1 item

On Removal of the Existing Suspended Ceiling, ensure

that all services and voids are fire stopped utilising -

Intumescent collars

Intumescent Expansion Seals

Fire Rated Boards

As determined from Site Inspection

5.2 Kitchen Areas - 1 item

Hygiene grade Perimeter Trim and Grid

Moisture Resistant (Hygienic Grade) 600x600 Tiles

Frame Work to Create Bulkheads as Required

-

6 Plastering

6.1 Plastering 1 item

Tape Joints

Apply Plaster Skim to the Following Areas -

Blocked Door Kitchen

Over Doorway to Small Store

Allowance for Various Repairs

-

7 Internal Joinery

7.1 Glazed Fire Door 1 item

Door Lining

Glazed Fire Door to Match Existing

Fire Rated Double Action Spring Hinges

Finger Plates and Kick Plates to match Existing

Fire Rated Euro Dead Lock

Double Thumb turn Euro Cylinder

Escutcheon Plates

Intumescent Smoke and Fire Seals

7.2 Fire Door (Store Cupboard) 1 item

Door Lining

Fire Door to Match Existing

Fire Rated Hinges

D' Handle to Match Existing

Fire Rated Euro Dead Lock

Single Euro Cylinder

Escutcheon Plate

Intumescent Smoke and Fire Seals

-

8 Electrical

8.1 Removal - 1 item

Identification of Circuits

Isolation

Disconnection of Appliance for Removal

Remove Face Plates and Surface Wiring

Remove Redundant Services

8.2 Alterations and Additions - 1 item

New Circuits for Appliances

Site Survey Required

Additional Socket Outlets

Design and Install LED Modular Lighting

Design and Install Emergency Lighting

Removal and Re-Installation of Fire Alarm Detection

Cat 6 Data Requirements for Order System

Connection of Appliances

Commission and Testing

-

9 Mechanical

9.1 Disconnection of Existing - 1 item

Remove WC and Basin and Dispose Off Site

Remove Handwash Sink and Sink Units (Set-Aside)

Remove Cleaners Sink (Set-Aside for new location)

Remove Surface Pipework to allow Cladding Works

Remove Redundant Pipework and Dead Legs

9.2 New Installation - 1 item

Install CWM, DHW, Secondary Return and Waste for

the Following Locations -

Note: All Copper with Munson Rings

Cleaners Sink

Prep Area - Sink Unit

Cook Area - Hand Wash

Wash Area - Sink Unit & Dishwasher

Counter Area - Coffee Machine

Hand Wash Sink

9.3 Installation and Connection of The Following 1 item

Isolation Valves and Connections as Required

Cleaners Sink

Prep Area - Sink Unit

Cook Area - Hand Wash

Wash Area - Sink Unit & Dishwasher

Counter Area - Coffee Machine

Hand Wash Sink

-

10 Floor Finishes

10.1 Vinyl Safety Flooring

General Repairs as Required

Latex Self levelling Compound

Altro Walkway 2.5mm Safety Flooring

Fully Welded with Coved Formed Upstands

Main Kitchen Areas 1 item

COSHH / Cleaners Store 1 item

Small Store 1 item

Lobby / Corridor 1 item

Dry Store 1 item

10.2 Carpet Tiles

Remove Existing Covering

Install Space Strobe Carpet Tiles

Admin Office 1 item

-

11 Decoration

11.1 Decoration Requirements - 1 item

All New Copper Pipework

Café - Wall to Blocked Kitchen Door

Cleaners Room

Small Store

Lobby / Corridor

Dry Store

Admin Office

-

12 Other

12.1 Stainless Steel around Oven - 1 item

Supply and Install S-Steel to the Rear and Side of the Oven

12.2 Cleaners Sink - 1 item

Supply and Install WhiteRock Splashback

12.2 Other (Installation Only) 1 item

Fabricated Stainless Steel Units

Note: Allow for Fabrication Drawings for New Bespoke Units

Appliances

Stainless Steel Shelving and Installation

Cleaners Room Spur Shelving and Installation

Dry Store Spur Shelving and Installation

-

Summary

1 Preliminaries

2 Demolition and Clearance

3 Structural and Alterations

4 Walls

5 Ceilings

6 Plastering

7 Joinery

8 Electrical

9 Mechanical

10 Floor Finishes

11 Decoration

12 Other Considerations

Total (Subject to VAT) -

3 Amodau ar gyfer Cymryd Rhan

3.1

Safonau gofynnol a'r cymhwyster sydd ei angen

Works to be started by Friday 8th April 2022 and completed by Sunday 15th May 2022.

We will review any submissions looking at the following brief criteria:

1. How does the installation factor in sustainability and does it include plans on how to minimise environmental impact in the short and long term?

2. Will the installation be suitable for years to come?

3. Does the installation factor in all current legislation with regards to building regulations and food preparation requirements?

4. Can the schedule be met?

5. Can the applicant demonstrate quality workmanship in previous works?

4 Gwybodaeth Weinyddol

4.1

Math o Weithdrefn

Un cam

4.2

Rhif cyfeirnod a roddwyd i'r hysbysiad gan yr awdurdod contractio

N/a

4.3

Terfynau Amser

4.5

Yr iaith neu'r ieithoedd y gellir ei/eu defnyddio i lunio tendrau neu geisiadau i gymryd rhan

4.6

Blwch Postio Cyflwyno Tendrau

5 Gwybodaeth Arall

5.1

Gwybodaeth Ychwanegol

This notice has been sent as a region specific notice. If you did not receive an alert about this you are not based in the specific region selected by the buying authority. Questions on why this was sent as a region specific notice should be sent to the buying authority.

(WA Ref:117846)

Relates to the following project/programme financed by EU Community Funds: WCVA Social Business Growth Fund Social Investment Cymru European Regional Development Fund

Social Investment Cymru

European Regional Development Fund

5.2

Dogfennaeth Ychwanegol

5.3

Dyddiad cyhoeddi'r hysbysiad hwn