Hysbysiad contract
Adran I:
Endid
contractio
I.1) Enw a chyfeiriad
Ministry of Defence, DSTL, Defence Science and Technology Laboratory (DSTL)
Dstl Commercial Services, Building 5, Room G-02, Porton
Salisbury
SP4 0JQ
UK
Person cyswllt: Craig Flynn MCIPS
Ffôn: +44 1980954132
E-bost: caflynn@dstl.gov.uk
NUTS: UK
Cyfeiriad(au) rhyngrwyd
Prif gyfeiriad: https://in-tendhost.co.uk/dstl/aspx/home
I.3) Cyfathrebu
Mae'r dogfennau caffael ar gael ar gyfer mynediad uniongyrchol anghyfyngedig a llawn, yn rhad ac am ddim ar:
https://in-tendhost.co.uk/dstl/aspx/home
Gellir cael gwybodaeth ychwanegol o'r cyfeiriad uchod
Rhaid anfon tendrau neu geisiadau i gymryd rhan yn electronig at:
https://in-tendhost.co.uk/dstl/aspx/home
Rhaid anfon tendrau neu geisiadau i gymryd rhan i'r cyfeiriad uchod:
I.4) Y math o awdurdod contractio
Gweinyddiaeth neu unrhyw awdurdod cenedlaethol neu ffederal arall, gan gynnwys eu his-adrannau rhanbarthol neu leol
I.5) Prif weithgaredd
Amddiffyn
Adran II: Gwrthrych
II.1) Cwmpas y caffaeliad
II.1.1) Teitl
Supply, Installation and Commissioning of an Electrical Discharge Machining (EDM) Die Sink (Lot 1) and 5-Axis Machining Centre (Lot 2)
Cyfeirnod: R1000159428
II.1.2) Prif god CPV
42600000
II.1.3) Y math o gontract
Cyflenwadau
II.1.4) Disgrifiad byr
The authority has a requirement for the supply, installation and commissioning of machine tools/workshop equipment.
This requirement is split into two separate lots; comprising:
Lot 1: An Electrical Discharge Machining (EDM) Die Sink Machine; and
Lot 2: A 5-Axis Machining Centre.
This procurement is being undertaken under the Public Contracts Regulations 2015 under the open procedure.
Suppliers wishing to tender for this requirement (whether Lot1 , Lot 2 or both Lots) can access the procurement documents which are available for unrestricted and direct access, free of charge, and must be submitted electronically via https://in-tendhost.co.uk/dstl/aspx/home
Full details of the authority's requirements, including the associated statements of requirement, and tender assessment criteria are all provided in the procurement documentation available from the above website.
II.1.5) Cyfanswm gwerth amcangyfrifedig
Gwerth heb gynnwys TAW: 458 334.00 GBP
II.1.6) Gwybodaeth am lotiau
Mae’r contract hwn wedi’i rannu’n lotiau:
Ydy
Gellir cyflwyno tendrau ar gyfer pob lot
Ceidw’r awdurdod contractio yr hawl i ddyfarnu contractau gan gyfuno’r lotiau neu’r grwpiau o lotiau canlynol:
Lots 1 and 2 may be awarded to one bidder if the outcome of tender assessment on each lot results in the same winning bidder.
II.2) Disgrifiad
Rhif y Lot Lot 2
II.2.1) Teitl
Supply, Installation and Commissioning of a 5-Axis Machining Centre
II.2.2) Cod(au) CPV ychwanegol
42600000
II.2.3) Man cyflawni
Cod NUTS:
UK
Prif safle neu fan cyflawni:
UNITED KINGDOM.
II.2.4) Disgrifiad o’r caffaeliad
Full details of the authority's requirement and the procurement documents are available for unrestricted and direct access, free of charge, and must be submitted electronically via https://in-tendhost.co.uk/dstl/aspx/home
II.2.5) Meini prawf dyfarnu
Nid pris yw’r unig faen prawf dyfarnu a dim ond yn y dogfennau caffael y mae’r holl feini prawf wedi’u nodi
II.2.6) Gwerth amcangyfrifedig
Gwerth heb gynnwys TAW: 275 000.00 GBP
II.2.7) Hyd y contract, y cytundeb fframwaith neu’r system brynu ddynamig
Dechrau:
01/02/2021
Diwedd:
31/03/2021
Gall y contract hwn gael ei adnewyddu: Na
II.2.9) Gwybodaeth am y cyfyngiadau ar nifer yr ymgeiswyr a gaiff eu gwahodd
II.2.10) Gwybodaeth am amrywiadau
Derbynnir amrywiadau:
Na
II.2.11) Gwybodaeth am opsiynau
Opsiynau:
Na
II.2.13) Gwybodaeth am Gronfeydd yr Undeb Ewropeaidd
Mae'r broses gaffael yn gysylltiedig â phrosiect a/neu raglen a ariennir gan gronfeydd yr Undeb Ewropeaidd:
Na
Rhif y Lot 1
II.2.1) Teitl
Supply, Installation and Commissioning of an Electrical Discharge Machining (EDM) Die Sink Machine
II.2.2) Cod(au) CPV ychwanegol
42600000
II.2.3) Man cyflawni
Cod NUTS:
UK
Prif safle neu fan cyflawni:
UNITED KINGDOM.
II.2.4) Disgrifiad o’r caffaeliad
Suppliers wishing to tender for this requirement (whether Lot 1, Lot 2 or both Lots) can access the procurement documents which are available for unrestricted and direct access, free of charge, and must be submitted electronically via https://in-tendhost.co.uk/dstl/aspx/home
II.2.5) Meini prawf dyfarnu
Nid pris yw’r unig faen prawf dyfarnu a dim ond yn y dogfennau caffael y mae’r holl feini prawf wedi’u nodi
II.2.6) Gwerth amcangyfrifedig
Gwerth heb gynnwys TAW: 183 334.00 GBP
II.2.7) Hyd y contract, y cytundeb fframwaith neu’r system brynu ddynamig
Dechrau:
01/02/2021
Diwedd:
31/03/2021
Gall y contract hwn gael ei adnewyddu: Na
II.2.9) Gwybodaeth am y cyfyngiadau ar nifer yr ymgeiswyr a gaiff eu gwahodd
II.2.10) Gwybodaeth am amrywiadau
Derbynnir amrywiadau:
Na
II.2.11) Gwybodaeth am opsiynau
Opsiynau:
Na
II.2.13) Gwybodaeth am Gronfeydd yr Undeb Ewropeaidd
Mae'r broses gaffael yn gysylltiedig â phrosiect a/neu raglen a ariennir gan gronfeydd yr Undeb Ewropeaidd:
Na
Section III: Gwybodaeth gyfreithiol, economaidd, ariannol a thechnegol
III.1) Amodau ar gyfer cymryd rhan
III.1.2) Statws economaidd ac ariannol
Meini prawf dethol fel y’u nodir yn y dogfennau caffael
III.1.3) Gallu technegol a phroffesiynol
Meini prawf dethol fel y’u nodir yn y dogfennau caffael
III.2) Amodau sy’n gysylltiedig â’r contract
Section IV: Gweithdrefn
IV.1) Disgrifiad
IV.1.1) Y math o weithdrefn
Gweithdrefn agored
IV.1.8) Gwybodaeth am Gytundeb Caffael y Llywodraeth (GPA)
The procurement is covered by the Government Procurement Agreement:
Ydy
IV.2) Gwybodaeth weinyddol
IV.2.2) Terfyn amser i dendrau neu geisiadau i gymryd rhan ddod i law
Dyddiad:
08/01/2021
Amser lleol: 17:00
IV.2.4) Ym mha iaith/ieithoedd y gellir cyflwyno tendrau neu geisiadau i gymryd rhan
EN
IV.2.6) Yr isafswm cyfnod gofynnol i’r sawl sy’n tendro gynnal y tendr
Hyd mewn misoedd: 3 (o’r dyddiad a nodwyd i dendr ddod i law)
IV.2.7) Amodau ar gyfer agor tendrau
Dyddiad:
11/01/2021
Amser lleol: 10:00
Section VI: Gwybodaeth ategol
VI.1) Gwybodaeth am ailddigwydd
Caffaeliad cylchol yw hwn:
Na
VI.2) Gwybodaeth am lifau gwaith electronig
Derbynnir anfonebau electronig
Defnyddir taliadau electronig
VI.3) Gwybodaeth ychwanegol
The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement. The authority reserves the right to amend any condition related to security of information to reflect any changes in national law or government policy. If any contract documents are accompanied by instructions on safeguarding classified information (e.g. a Security Aspects Letter), the authority reserves the right to amend the terms of these instructions to reflect any changes in national law or government policy, whether in respect of the applicable protective marking scheme, specific protective markings given, the aspects to which any protective marking applies, or otherwise. The link below to the Gov.uk website provides information on the Government Security Classification.
https://www.gov.uk/government/publications/government-security-classifications
Advertising Regime OJEU: this contract opportunity is published in the Official Journal of the European Union (OJEU), the MoD Defence Contracts Bulletin and www.contracts.mod.uk Go reference: GO-20201124-DCB-17414500
VI.4) Gweithdrefnau adolygu
VI.4.1) Corff adolygu
Ministry of Defence, DSTL, Defence Science and Technology Laboratory (DSTL)
Dstl Commercial Services, Building 5, Room G-02, Porton
Salisbury
SP4 0JQ
UK
Ffôn: +44 1980954132
E-bost: caflynn@dstl.gov.uk
VI.4.2) Corff sy’n gyfrifol am weithdrefnau cyfryngu
Ministry of Defence, DSTL, Defence Science and Technology Laboratory (DSTL)
Salisbury
UK
Ffôn: +44 1980954132
E-bost: caflynn@dstl.gov.uk
VI.4.4) Y gwasanaeth lle y gellir cael gwybodaeth am y weithdrefn adolygu
Ministry of Defence, DSTL, Defence Science and Technology Laboratory (DSTL)
Salisbury
UK
Ffôn: +44 1980954132
E-bost: caflynn@dstl.gov.uk
VI.5) Dyddiad anfon yr hysbysiad hwn
24/11/2020